Infrared heater CERAMOTHERM 3000
The infrared heater is used to maintain the patient's body temperature and preheat mattresses and beds. When the equipment is used, the patient's upper body warms up, small blood vessels dilate, thus activating metabolism and accelerating heat transport in the blood. The use of the equipment is extremely important for infants during postnatal care, undressed infants during diaper changes, infants and children undergoing long-term examination, and in the treatment of children and adults. Due to their portability, infrared heaters on a mobile stand can be used in different places or in different rooms depending on the needs of the patient. If necessary, the heater can also be used on patient beds or operating tables. Warranty period: 12 months
Free shipping
Guarantee
Features
- Comprehensive safety - the heating elements are located behind a dense grid, the infrared light source does not cause any injury to the patient's eyes and skin, automatic reduction of the radiation intensity to a safe value after a certain time when using high radiation intensity to maintain body temperature.
- The latest high-performance reflector directs the radiation intensity of the heating element directly and evenly onto the patient's mattress. Therefore, the generation of dangerous amounts of heat is not possible with this heater.
- The integrated patient temperature measurement and skin temperature monitoring is servo-regulated and features an audible and visual warning in the event of a disconnected temperature sensor (optional).
- Displays the set and actual radiation intensity and residual heat after the equipment has been switched off and until it has cooled down completely.
- Two panel light sources are integrated into the dimmable heater (5 levels of dimming) to provide even light that does not blind the patient or others.
- Fast heating function. The heating time from room temperature to the maximum/selected intensity is approximately 15 minutes.
- Adjustment of radiation intensity in mW/cm2 or in %.
- Built-in timers: APGAR timer (assessment of the baby's condition after birth), stopwatch, countdown timer, CPR timer (cardiopulmonary resuscitation).
Characteristics
- Width x Depth: 560 x 560 mm
- Total height: 1535 - 1935 mm
- The wavelength spectrum of the infrared heater: 1.5 to 6.8 µm
- Rotation angle of the infrared heater: 360°
- Vertical adjustment: ± 45°
- Ceramic heating elements: 2 pcs.
- Power of the heating elements: 800 W (2 x 400 W)
- Intensity selection/irradiated area at working distance: 2-30 mW/cm2/390 x 680 mm
- Integrated lighting in the infrared heater: 2 pcs, on both sides
- Ability to adjust the brightness of the lighting: in 5 steps
- Lighting power: 2 x 18 W
- Light intensity (max.): 2 x 1350 lm
- Max. connected power: 900 W / 3.9 A
- Features
- Characteristics
- Comprehensive safety - the heating elements are located behind a dense grid, the infrared light source does not cause any injury to the patient's eyes and skin, automatic reduction of the radiation intensity to a safe value after a certain time when using high radiation intensity to maintain body temperature.
- The latest high-performance reflector directs the radiation intensity of the heating element directly and evenly onto the patient's mattress. Therefore, the generation of dangerous amounts of heat is not possible with this heater.
- The integrated patient temperature measurement and skin temperature monitoring is servo-regulated and features an audible and visual warning in the event of a disconnected temperature sensor (optional).
- Displays the set and actual radiation intensity and residual heat after the equipment has been switched off and until it has cooled down completely.
- Two panel light sources are integrated into the dimmable heater (5 levels of dimming) to provide even light that does not blind the patient or others.
- Fast heating function. The heating time from room temperature to the maximum/selected intensity is approximately 15 minutes.
- Adjustment of radiation intensity in mW/cm2 or in %.
- Built-in timers: APGAR timer (assessment of the baby's condition after birth), stopwatch, countdown timer, CPR timer (cardiopulmonary resuscitation).
- Width x Depth: 560 x 560 mm
- Total height: 1535 - 1935 mm
- The wavelength spectrum of the infrared heater: 1.5 to 6.8 µm
- Rotation angle of the infrared heater: 360°
- Vertical adjustment: ± 45°
- Ceramic heating elements: 2 pcs.
- Power of the heating elements: 800 W (2 x 400 W)
- Intensity selection/irradiated area at working distance: 2-30 mW/cm2/390 x 680 mm
- Integrated lighting in the infrared heater: 2 pcs, on both sides
- Ability to adjust the brightness of the lighting: in 5 steps
- Lighting power: 2 x 18 W
- Light intensity (max.): 2 x 1350 lm
- Max. connected power: 900 W / 3.9 A
