Easy Care paediatric bed
The Easy Care paediatric bed is used for baby changing, treatment and care of newborns and older babies weighing up to 8 kg and up to 70 cm in height. Mobility for more flexible use - optimal use of the given area, Easy Care can be used from 3 different sides. Regardless of the existing spatial and structural conditions, Easy Care is a mobile alternative for rooms and wards that do not allow for a permanent installation of an infrared heater. Warranty period: 12 months Country of manufacture: Germany
Free shipping
Guarantee
Features
- The patient's upper body is heated by an infrared heater.
- The heating time of the infrared heater from room temperature to the maximum/selected intensity is approximately 15 minutes.
- Adjustment of radiation intensity in mW/cm2 , % or depending on the patient's body temperature.
- Two panel light sources are integrated into the dimmable heater (5 steps).
- The patient bed has three closed sides to prevent the patient from falling. The PU mattress has soft padding for the side walls.
- Integrated patient temperature measurement and skin temperature control - the radiation intensity of the infrared heater is controlled by a servo.
- Audible and visual warning if the temperature sensor is disconnected.
- Audible and visual alarms are available.
- Built-in timers: - APGAR timer (assessment of the baby's condition after birth); - stopwatch; - countdown timer; - CPR timer (cardiopulmonary resuscitation).
Characteristics
- Depth x Width: 620 x 960 mm
- Height of the lying surface: 960 mm or 850 - 1 150 mm (depending on the model selected)
- Bed depth x width: 460 x 720 mm
- Smooth double wheels: 4 pcs
- Drawer capacity: 400 x 150 x 160 mm
- Features
- Characteristics
- The patient's upper body is heated by an infrared heater.
- The heating time of the infrared heater from room temperature to the maximum/selected intensity is approximately 15 minutes.
- Adjustment of radiation intensity in mW/cm2 , % or depending on the patient's body temperature.
- Two panel light sources are integrated into the dimmable heater (5 steps).
- The patient bed has three closed sides to prevent the patient from falling. The PU mattress has soft padding for the side walls.
- Integrated patient temperature measurement and skin temperature control - the radiation intensity of the infrared heater is controlled by a servo.
- Audible and visual warning if the temperature sensor is disconnected.
- Audible and visual alarms are available.
- Built-in timers: - APGAR timer (assessment of the baby's condition after birth); - stopwatch; - countdown timer; - CPR timer (cardiopulmonary resuscitation).
- Depth x Width: 620 x 960 mm
- Height of the lying surface: 960 mm or 850 - 1 150 mm (depending on the model selected)
- Bed depth x width: 460 x 720 mm
- Smooth double wheels: 4 pcs
- Drawer capacity: 400 x 150 x 160 mm
